OPTIVIEW AIRMAGNET WIFI ANALYZER

Produk baru

OptiView XG Network Analysis Tablet combines multiple functions and technologies so engineers are ready for anything, from the access layer to the data center, and can be left in place for proactive network monitoringn :

  • Network Analysis
  • Wireless Network Analysis: 802.11 a/b/g/n/ac WLAN + Spectrum Analyzer
  • Traffic and Packet Analysis: 1Gig – 10Gig Wired (full line-rate)
Physical Specifications
Dimensions (H,W,D) 9.45" x 12.43" x 2.03" (240 mm x 315.7 mm x 51.6 mm)
Weight 5.6 lb. (2.5 kg) with batteries; 4.5 lb. (1.8 kg) without batteries
Display Color active matrix TFT LCD, 1024 x 768 pixels, LED backlight, touch panel with 2 touch points
Security Kensington® security slot on rear panel for connection of security cable
Environmental Specifications
Operating Temperature* 10°C to 30°C (50°F to 86°F) with up to 95% Relative Humidity. 0°C to 50°C (32°F to 122°F) with up to 75% Relative Humidity
Storage Temperature -40°F to +160°F (-40°C to +71°C)
Shock and Vibration Meets requirements of MIL-PRF-28800F for Class 3 equipment
Safety EN 61010-1 2nd Edition
Altitude** 4600 m (15000 ft) on batteries
Electrical Specifications
AC Adapter Input 100 V – 240 V, 50/60 Hz, 1.5 A
AC Adapter Output 19 VDC, 4.74 A, 90 W
Battery* Two user-replaceable, rechargeable, 45 Watt-hour, lithium-ion battery packs.
Battery Operating Time 2 hr. (typical - can be extended to approximately four hours by disabling/powering down the network under test ports for doing extended WLAN analysis)
Battery Charge Time* 3 hr. (typical). Charge time depends on residual battery charge
System Specifications
Operating System Window 7 Professional, 64 Bit, Service Pack 1
PC - Processor Intel® Core™ Duo CPU U9300 @ 1.2GHz
PC - RAM 4 GB
Capture Buffer 4 GB

Wired Network Connection Specifications

Ports
Network Analysis Ports 2 RJ-45 10/100/1000BASE-T Ethernet, Small form-factor pluggable (SFP) 100/1000BASE-X Ethernet, enhanced small form-factor pluggable (SFP+) 10GBASE-X Ethernet
Management Port RJ-45 10/100/1000BASE-T Ethernet
Supported SFP Modules 1000BASE-SX - 850 nm (Standard)
100BASE-FX - 1300 nm
1000BASE-LX - 1310 nm
1000BASE-ZX - 1550 nm
Supported SFP+ Modules 10GBASE-SR - 850 nm (Standard)
10GBASE-LR - 1310 nm
10GBASE-LRM - 1310 nm
Fault Tolerance RJ-45 Ports are designed to withstand a maximum of 100 volts
USB Ports Three USB 2.0 ports
eSATA Port eSATA port for connecting external hard drive
Video Port Standard VGA port for connection to monitor or projector
Cables
Cable Types 100 Ohm UTP and ScTP category 5, 5E, 6, ISO/IEC Class C, D, E
Cable Length Measurement Measurable cable lengths are from 3 feet (0.9 meters) to 500 feet (152 meters)
Accuracy: ± 6 feet (± 2 meters)
Length measurement is based on Nominal Velocity of Propagation (NVP) for selected cable type

Wireless Network Connection Specifications

Wireless Antennas
Internal Wireless Antennas Seven internal 2.4 GHz, 1.1 dBi peak, 5 GHz,
3.2 dBi peak antennas
External Omni-directional Antenna Antenna, WLAN, omnidirectional, 2.4 & 5 GHz
802.11 A/B/G, 50 Ω. Gain: 2.1 dBi (2.45 GHz)
2.4 dBi (4.9 GHz), 2.6 dBi (5.25 GHz), 2.5 dBi (5.875 GHz)
External Directional Antenna Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band
External Antenna Connector Reverse SMA
Wireless Adapters
Data Rate 11a: 6/9/12/24/36/48/54 Mbps
11b: 1/2/5.5/11 Mbps
11g: 6/9/12/24/36/48/54 Mbps
11n (20 MHz): MCS0-23, up to 216 Mbps
11n (40 MHz): MCS0-23, up to 450 Mbps
Operating Frequency 2.4000 ~ 2.472 GHz (Industrial Scientific Medical Band) 5.180 ~ 5.825 GHz
Security 64/128-Bit WEP Key, WPA, WPA2, 802.1x
Transmit Output Power
(Tolerance: ±1.5 dBm)
802.11b: 18 dBm
802.11b: 18 dBm
802.11g: 17 dBm
802.11a: 11 dBm
802.11n: 2.4 GHz:17 dBm
802.11n: 5 GHz:13 dBm
Receive Sensitivity
(Tolerance: ±2 dBm)
802.11a: 10% PER -78 dBm
802.11b: 8% PER -90 dBm
802.11g: 10% PER -80 dBm
802.11n: 2.4 GHz 10% PER
-72 dBm@HT20
-70 dBm@HT40
802.11n: 5 GHz 10% PER
-70 dBm@HT20
-63 dBm@HT40
Power Consumption (Typical ) Transmitting (Legacy mode, HT20 mode): 870 mA @5 GHz, 700 mA @2.4 GHz
Transmitting (HT40 mode): 900 mA @5 GHz, 750 mA @2.4 GHz
Receiving (Legacy mode, HT20 mode): 550 mA @5 GHz, 520 mA @2.4 GHz
Receiving (HT40 mode): 610 mA @5 GHz, 600 mA @2.4 GHz

Standards and Compliance Specifications

Supported Network Standards
IEEE 10BASE-TX, IEEE 100BASE-TX,
IEEE 1000BASE-TX, IEEE 1000BASE-X,
IEEE 10GBASE-X
RFCs: 1213, 1239, 1285, 1512, 1513, 1643, 2108, 2115, 2127, 2515, 2819, 3592, 3895, 3896, 4188, 4502
Compliance Statements
EMC Complies with IEC/EN61326-1:2006, class A
Safety Complies with IEC/EN 61010-1:2001, CAN/CSA C22.2 No. 61010-1-04, ANSI/UL 61010-1:2004, EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007
Telephone* The OptiView XG is NOT designed for connection to a telephone network
The OptiView XG is NOT designed for connection to an ISDN line

Belum ada review dari pelanggan.

Tulis komentar Anda

OPTIVIEW AIRMAGNET WIFI ANALYZER

OPTIVIEW AIRMAGNET WIFI ANALYZER

OptiView XG Network Analysis Tablet combines multiple functions and technologies so engineers are ready for anything, from the access layer to the data center, and can be left in place for proactive network monitoringn :

  • Network Analysis
  • Wireless Network Analysis: 802.11 a/b/g/n/ac WLAN + Spectrum Analyzer
  • Traffic and Packet Analysis: 1Gig – 10Gig Wired (full line-rate)

Related Products